753
Use our Product Finder Tool to narrow down the needed products to complete your restoration project. Any addtional questions, you can ask below in the comments.
Use our Product Finder Tool to narrow down the needed products to complete your restoration project. Any addtional questions, you can ask below in the comments.
Can supersteel 30 be used for interior concrete floors
What type of concrete floors? In theory yes, but it will have a strong odor.
I have a Brick Paver driveway and walkway, 13 years old, red color, have had it stripped, sanded and sealed it a few times, and it’s 1750 sq’…. It is due again, and there is a company locally who uses steam and a chemical to clean it, and then he seals it, used about 3 years ago, and it needs it again! This time I would have him steam and strip, but I would buy the BEST sealer made for Tampabay, Florida, from you guys, and it is 90deg outside now, on May 7th! My Handyman would roll it on, and use two coats! Which sealer do you recommend that will last the Longest/Best? What is the best stripper you sell, that can be used with the steam truck to get the paver down to it’s bare surface!!
You do not need to strip this, just the pressure wash. As for the sealer, use the SuperSeal 30: https://www.opwdecks.com/superseal30-gloss-5-gallon.htm
I have a 12′ x 15′ patio slab that I just surrounded with a 4′ border using the 16″ x 16″ red stamped concrete pavers. The overall dimension is now 16′ x 23′. I would like to seal the concrete slab and the stamped concrete pavers. What would you recommend?
Please post a picture in the comments.
Here you go. Though it does not appear as such in the image I have repaired rte crack down the middle.
You cannot use a wet look sealer on the concrete area but you can with the stamped area. Look at the Super Seal 25 or the Supreme Shield SB-600.
https://www.opwdecks.com/decorativestamped.htm
Well that is confusing. I do not want to apply two different sealers. One to the slab and one to the stamped pavers. Is there one sealer that I can use on both at the same time?
Sorry but no. Wet-look sealers are not going to work for plain poured concrete. Dries very blotchy.
Okay, I am over the wet look sealer for both. I just want to use a single sealer for this project. Are you then telling me there is NOT a sealer I can use on both the concrete slab and the stamped concrete pavers at the same time?
Your stamped concrete needs a filming sealer, not a penetrating sealer and that means it will have a gloss and or wet look and those types of sealers will not work on regular plain poured concrete. You should use two different types.
This for the plain poured concrete:
https://www.opwdecks.com/superseal-m-1-gallon.htm
Got it now! Thank you for the assistance!