| SUREBOND-5000 Stain Blocking Invisible Sealer is a water based, penetrating, low VOC sealer that provides an invisible, durable barrier against water, oil and stains on pavers, concrete and retaining walls. Ideal for driveways, industrial flooring, building entrances, shopping malls, food courts and other surfaces at risk for oil, food or other staining. The finish has a natural look that does not affect the appearance of the substrate. SB-5000 Stain Blocking Invisible Sealer is an aqueous fluorochemical dispersion that does not contain any silicone or wax components.
Preparation: To determine the suitability of this product for a specific surface, test on a small, inconspicuous area first. Sweep and remove all soil and other debris from the surface. Clean any stains or efflorescence using Surebond SB-442 General Stain Remover or SB-488 Efflorescence & Rust Remover, respectively. Make sure all surfaces are dry. Stir before using. Application Information: For best results, apply SB-5000 Stain Blocking Invisible Sealer at full strength (never dilute) using a low-pressure spray, roller, sponge or paint pad. If sprayed, use low pressure and do not exceed 60 PSI. Make sure that the surface is completely covered. On new, porous or high traffic surfaces a second coat is recommended. A second coat is also required for areas with high exposure to staining. It is recommended that this second coat be applied at right angles to the first application. Use liberally (but do not allow to puddle) and remove excess immediately. Apply second coat immediately after the first coat, using a wet on wet application. Tools, applicators and hands can be cleaned with water. Coverage Per Gallon: 100-200 square feet depending on substrate porosity.Product Data Sheet |
Benefits:
|
SB-5000 Stainblocking Invisible Sealer
-
Sold out
-
Sold outFree shipping
