Wet Look. Gloss, and Joint Stabilizing Sealer
SB-8700 will seal and enhance the beauty of new and old concrete, masonry and related surfaces. In addition, SB-8700 will stabilize the joint sand creating a long lasting hardened joint. It is ideal for Interlocking concrete pavers, stamped concrete, or masonry surfaces giving them an enhanced, wet look, glossy finish. SB-8700 is the perfect product to restore the look and elegance of old/tired pavers. Also works on limestone, sandstone, clay and natural stones.
What makes SB-8700 Wet Look Joint Stablizing Sealer different?
- 2 in 1 Product – Seals with a luxurious, enhanced wet look and stabilizes joint sand
- Gloss Finish
- Resistant – Helps create a sand joint that is resistant to weeds and insects
- Water Repellant/Rain Safe – Water repellent qualities and “Rain Safe” within 90 min.
- Anti-Fungal – Prevents mold, algae and moss
- Breathable – Can be applied immediately to new installations; will not trap naturally occuring efflorescense
PRODUCT DESCRIPTION
SB-8700 is an advanced premium acrylic sealer that will not yellow under exposure to sunlight. SB-8700 is a 2 in 1 product; it protects the substrate surface and stabilizes jointing sand at the same time. SB- 8700 is specially formulated with antifungal agents designed to help inhibit the growth of mold, fungi and moss on horizontal pavement surfaces. It forms a tenacious bond to the concrete or masonry surface. The high solids formula combines properties of adhesion, flexibility and UV light resistance to provide a long lasting surface seal and sand joint. SB-8700 will penetrate the substrate and provide a protective layer on the surface that is resistant to mild acid, alkali, and salt attacks. SB-8700 will increase the stain resistance of the concrete and allow easier cleaning, maintenance, and extended wear. SB-8700 can be applied immediately after paver installation, as it is breathable and will not trap the naturally occurring efflorescence. SB-8700 is an advanced formula that makes it “rain safe” in 90 minutes.
Coverage
100-200 Sq. Feet Per Gallon
There is a hot tub on the deck above, so not sure if this is calcium leaching up, or staining from hot tub chemicals. Do you have a recommendation to restore the exposed aggregate to a uniform color?
Does it look even when wet with water?
You can still white after sprayed with water
Without knowing exactly the cause of the discoloration there is no way to know for certain how to remove. Cleaners are specific at removing the stain and yours could be one of 10 things. You could try this but not 100% certain it will work: https://www.opwdecks.com/masonry-saver-defy-safer-brick-and-masonry-cleaner.htm
If not, what do you recommend as an alternative?
Can this be used in NY?
Can this be shipped to California?
Sorry but it is not VOC compliant for CA.