High-quality concrete sprayer for the professional. Solid brass nozzle and wand. Can be used with SuperSeal25 sealer and all stains and cleaners. It will not work with SuperSeal30 sealer.
Related products
-
Free shipping
Wooster 6″ Pro Stain Brush
$26.99 -
HD-80 Wood Stripper 2lbs
$39.99 -
Free shipping
Deck Scrub Brush
$21.99 -
Free shipping
Defy Marine Seal Wood Stain
$164.99 – $269.15
Could you use the “ HEAVY DUTY SPRAYER “ with the 1300 joint stabilizer sealer ???? Thank you
Yes! Works great!
Will this spray “SuperSeal Matte”. I tried using it with SuperSeal25 Semi-Gloss and it failed. See photos.
Will this spray “SuperSeal Matte”. I tried using it with SuperSeal25 Semi-Gloss and it failed. See photos.
It will spray both but you have to pump it up better and keep it pumped up during application so you do not have “thick” lines on the sides.
I could swear I pumped the hell out of it, but I’ll try it again.
Which model is this and can it be used to spray SB600?
Chapin 1949 and yes, you can use it for the SB-600.
can you use an airless sprayer for the 25 sealer if so what size spray tip
Sorry but no.
Will this sprayer be ok for application of Supreme Shield SB-600 and if so what should I use for clean up?
Yes and use lacquer thinner for cleanup.
Yes you can use this for AC stains. Clean with mineral spirits.
I can use this sprayer to apply Armstrong clark semi transparent stains? I should back brush I assume. Can I clean with xylene?
I recently purchased the Chapin heavy duty sprayer to apply solvent based
sealer to my stamped concrete. What is the best procedure to clean the sprayer hen finished? Will water be sufficient?
It will spray transparent and semi-transparent oil stains. It will not spray solid stains. It is a very good. high quality sprayer.
I want to spray a 800 sq, ft. deck with oil based stain, will this sprayer handle the job? If not can you reccomend one that will? I’ll be treating pressured treated wood.
what is the maintenance of this chapin sprayer. how is it cleaned after spraying on superseal 25?(or should i just be using a roller?)
Great for applying the SuperSeal 25 Sealers