Wet Look. Gloss, and Joint Stabilizing Sealer
SB-8700 will seal and enhance the beauty of new and old concrete, masonry and related surfaces. In addition, SB-8700 will stabilize the joint sand creating a long lasting hardened joint. It is ideal for Interlocking concrete pavers, stamped concrete, or masonry surfaces giving them an enhanced, wet look, glossy finish. SB-8700 is the perfect product to restore the look and elegance of old/tired pavers. Also works on limestone, sandstone, clay and natural stones.
What makes SB-8700 Wet Look Joint Stablizing Sealer different?
- 2 in 1 Product – Seals with a luxurious, enhanced wet look and stabilizes joint sand
- Gloss Finish
- Resistant – Helps create a sand joint that is resistant to weeds and insects
- Water Repellant/Rain Safe – Water repellent qualities and “Rain Safe” within 90 min.
- Anti-Fungal – Prevents mold, algae and moss
- Breathable – Can be applied immediately to new installations; will not trap naturally occuring efflorescense
PRODUCT DESCRIPTION
SB-8700 is an advanced premium acrylic sealer that will not yellow under exposure to sunlight. SB-8700 is a 2 in 1 product; it protects the substrate surface and stabilizes jointing sand at the same time. SB- 8700 is specially formulated with antifungal agents designed to help inhibit the growth of mold, fungi and moss on horizontal pavement surfaces. It forms a tenacious bond to the concrete or masonry surface. The high solids formula combines properties of adhesion, flexibility and UV light resistance to provide a long lasting surface seal and sand joint. SB-8700 will penetrate the substrate and provide a protective layer on the surface that is resistant to mild acid, alkali, and salt attacks. SB-8700 will increase the stain resistance of the concrete and allow easier cleaning, maintenance, and extended wear. SB-8700 can be applied immediately after paver installation, as it is breathable and will not trap the naturally occurring efflorescence. SB-8700 is an advanced formula that makes it “rain safe” in 90 minutes.
Coverage
100-200 Sq. Feet Per Gallon
I used the Super Sealer 25 a few years ago on my paver patio. I don’t like the look of it.
Would like to go with something that makes the pavers look wet all the time.
Can this product be rolled on top of the 25 without stripping ?
No, you would have to remove the SS25 first.
What would be the best product for stripping the 25 off? I’m assuming the RAD stripper?
Hi, any of these would work:
https://www.opwdecks.com/concrete-sealer-stripper.htm
Sorry but no.
You will need this to remove:
https://www.opwdecks.com/paver-sealer-stripper.htm
It is normal to redo every few years.
What do I use to remove this? After several years, the coating is turning white. Need to strip it and start over.
Post some pics in the comments of the issue.
This product is not thick enough to have a non skid additive added. Lasts about 2 years.
Can none skid material be added to the sealer and approximately how long does it last on a driveway in Florida.
Does the SB-8700 really leave a wet look and high gloss finish?