Now Available in the Original Low-Gloss and the NEW High-Gloss
Masonry (Defy) Saver Epoxy Fortified Paver Sealer is formulated with special, heavy duty resins and mildewcides, that help to reduce the occurrence of fungus while also encapsulating the joint sand to retard the infiltration of ant colonies. It is also a paver sand sealer which helps keep patios cleaner by stabilizing the joint sand, bonding it firmly in place, and helping to keep the sand from washing out during periods of heavy rain as well as helping to reduce weeds from growing up through the joint sand. When properly applied, Masonry Saver Epoxy Fortified Paver Sealer enhances the beauty of any paver with a rich “wet” look without causing the surface to become slippery.
- Protection From Water & Ultra-Violet Light Damage
- Protection From De-Icing Salts & Chemicals
- Freeze/Thaw Protection
- Stabilizes Joint Sand to Reduce Rain Wash-Out
- Minimizes Weed Growth and Ant Colonization
- Mildew/Fungus Protection
- Provides a Rich “Wet Look” to Stone & Concrete
Coverage Rate:(2 Coats)
Cement Pavers: 75-150 sq. feet per gallon
Clay Pavers: 150-200 feet per gallon. Actual rates will vary widely due to substrate porosity.
You can apply the Defy Paver Sealer with the Chapin sprayer. It is fairly easy!
Is the Defy Paver Sealer applied with the Chapin Clean & Stain Sprayer. Is it just a matter of filling the spray container and then covering the surface?
We have a new paver patio of about 450 sq ft. I am thinking that a 5 gal bucket and the sprayer would do the trick but want to confirm.
Thanks
Can I use this with a plastic sprayer. Do you recommend two coats? Also when can I drive on it. Right now my driveway is NOT sealed and after pressure washing, four days later I see light tire tracks from my Ford truck. After sealing with DEFY paver sealer will these tire tracks show up again??
Easy to apply water-based sealer for pavers.