631
Questions regarding Concrete and Brick Sealing.
Questions should relate to How-To Tips and the different types of Sealers and Water Repellents that you should use for your surface.
I have about 850 SF of concrete pavers that are 4 years old and have faded from the strong Florida sun and lots of rain. I plan to power wash and sand the joints as needed. I don’t want a glossy finish. Prefer a matt finish or ideally a wet look to restore the color and protect the pavers. I was thinking water based for easy clean up. Thanks for your help.
Look at the Supreme Shield SB-600:
https://www.opwdecks.com/supreme-shield-sb-600-5-gallon.htm
I have a cement driveway that’s apps 20 years old. What is the correct sealer to use? I have already power washed and cleaned it. Do not want it to be glossy look. Just want sealer protection etc
This product. See link: https://www.opwdecks.com/superseal-m-5-gallon.htm
I have an exposed aggregate driveway that I will be sealing with Super Seal 25. I have several cracks that I would like to repair first. I have previously used a product called Eagle Exposed Aggregate Concrete Crack Filler, that I believe I purchased from you. I do not see this product on your site. Is it still available.
How long after applying SuperSeal30 High Gloss before someone can keep their car parked on it?
A full cure can take a few days. You could drive across it in 24 hours but for parking, we would wait at least 3 days.
Thanks sooo much!
Plan on sealing all my pavers with SuperSeal30 have a small concrete driveway adjacent to the pavers 12x 25 of 25 year old unsealed concrete. Concrete is in pretty good condition but has some exposed aggregate. After pressure washing everything could i use the tinted SuperSeal30 on the concrete. I understand will not be an exact match but just looking to protect and enhance the concrete
It is not designed for plain white concrete so not sure how it will look and turn out with the tint.
If I used a semi transparent stain to match could I use the superseal30 over that?
Not sure. Try a sample to see if it adheres okay:
https://www.opwdecks.com/concrete-sealer-samples.htm
Wet look and gloss sealers will not work on regular plain white concrete. Dries blotchy.
So what do you suggest then ??
To seal the surface you want a penetrating sealer that does not enhance the color:
https://www.opwdecks.com/m-non-gloss.htm
Do you use anything to clean the floor first? And then apply the penetrating sealer?
Try this for prep: https://www.opwdecks.com/cleaner-degreaser.htm
In spring 2 years ago I sealed my stamped concrete patio with Supreme Shield SB-600. Within several weeks large patches became milky white. I plan to seal the concrete again this spring. Questions, 1. should I strip the concrete before I power wash? 2. If so, what product should I use to strip and how much do I need (patio approx 375 SF. Also, 3) what product should I use to seal the patio after stripping- I like a shiny/glossy look (how many gallons do I need? 4 if I don’t need to strip what sealant should I use. Photos attached. Thanks
No photos.
Have 3 projects. One is concrete outdoor fully exposed patio. A lot of oak trees. Patio had heavy mold which was pressure washed. Want color seal to avoid growth of mild and repeal water. Next I have a covered l shape patio. Shows just superficial dirt from dog and person traffic. Want colored easy apply solution . Finally do you recommend sealing brick of house. I have worked to remove most of effervescence with various chemicals but wondered about sealing it
Sorry but we do not have any colored sealers, they are clear. For the bricks on th house, try this: https://www.opwdecks.com/masonry-saver-defy-brick-water-repellent-5-gallon.htm
Is there a sealer for brick pavers in North Carolina that will not turn white due to freeze/thaw climate?
Try this sealer: https://www.opwdecks.com/wet-look-no-gloss.htm
I sealed our driveway about 10 years ago with xylene based H&C concrete sealer. No color.. just clear. It has held up very well, but most areas are in need of a recoating; it is back to bare concrete. It was a high gloss product. I would prefer a flat or matte finish. Do you have a xylene based sealer that I could use over the H&C? For some reason H&C is impossible to find, and I really like using your TWP products, so I assume your concrete products are excellent as well.
Look at this: https://www.opwdecks.com/matte-gloss.htm
We have built a barndominium and are planning on leaving the concrete floor inside our living area un-covered (no carpet or laminate installed). We would like to seal to protect and for aesthetics. What sealer do you recommend? We believe we would like a lower gloss finish.
A wet look and or gloss sealer will not work on plain poured concrete. It will dry very botchy and uneven. These sealer types are only for decorative concrete surfaces.
You can use a sealer that will protect but not alter the appearance. Try Super Seal-M:
https://www.opwdecks.com/superseal-paver-sealers.htm
thank you!
Have exposed concrete driveway, never been sealed. Want a low gloss or matte finish.Would Super Seal 25 work vs Super Seal 30? Are either non-slip as driveway is sloped?
Use Supreme Shield SB-600 for low or no gloss.
Just had installed a deck with concrete pavers and polymeric sand. How long should I wait before applying SB600?
You can do it now as long as the pavers are clean and free of any polysand dust on top of the pavers.
I have a concrete fountain which was originally stained in the carved crevasses. It’s about 10 years old and I’d like to get at least another 10 years out of it. I’m looking for a matte sealer for the whole fountain including the 2 bowls. Hopefully one that I don’t have to reapply every other year.
Penetrating sealers will not work for water fountains or over a concrete stain, sorry.
CindyLou here, 64 but very capable. I have a new concrete small driveway and parking area, 3 weeks old, simple concrete/ brush finish. Im looking at SB5000 and like the reviews and product info blocks stain and water, invisible. good choice? I have about 645 sq ft to do only. live in WA state so rains alot. Am I making a mistake thinking I can apply on my own? (after cures 30 days of course) can an individual order it from you? Im thinking 8 gal? or just get 10 and have extra for my retaining wall
Very easy to apply. You can order right on our website. 5 gallons will cover 750-100 Sq feet.https://www.opwdecks.com/sb-stainblocking-sealer.htm
750-100? do you mean 750-1000? but don’t I also need 2 coats? =1300 sqft is it better to use spray and backroll, or just sponge on with paint pad..
750-1000 is correct. One coat is normal but you can add a second if desired. Just spray, do not backroll it.
I live in NW Oregon so lots of rain. Had a large driveway size concrete pavers put in 3 months ago. What do you recommend that will give it a semi wet look that will also protect from stains. Also, needs to be allowed use in Oregon. Why water based vs acyrlic based and it cannot yellow or put a white coat on the pavers. Thanks!
Look at using the Super Seal 25: https://www.opwdecks.com/25-semi-gloss.htm
It does not yellow or turn white.
Pavers sealer are all acrylic based and come in both water-based and solvent based.
Can SB-350 or 600 be used to seal an exposed aggregate drive way and brushed concrete patio? Do these products products provide the same protection as the SuperSeal products?
They can be used on aggregate but the Super Seal 30 is your best option for the aggregate.
hi this a 82 year old land mark building in CA. i want nice exterior/interior brick sealer . interior should look little shiny and should stop sand falling from walls.
Hello,
What do you recommend as a flat/matte sealer over an older concrete pool deck and an older concrete driveway? The pool deck has some spalding spots and small cracks (1/32 – 1/16″ wide). I would like to repair (fill) those areas before sealing – what products would you recommend to do the repairs that would be compatible with the sealer recommended & how long do I need to wait after repairing (filling) the concrete cracks & spalds before sealing? I will pressure wash the concrete before applying sealer. Thank you.
Sorry, but we do not sell fillers or know of any. As for the sealer, try this one: https://www.opwdecks.com/m-non-gloss.htmhttps://www.opwdecks.com/m-non-gloss.htm
I had water base sealer on my pavers and they turned white. I used paver stripper from you and cleaned the paver 3-4 times with 3300 PSI pressure cleaner. Most of the sealer is off but I can’t get that white haze off. What else can be done to get the white haze off before sealing with sealer
Use this to remove the soap residue: https://www.opwdecks.com/cleaner-degreaser.htm
Can I buy sample to see if it really works before buying whole gallon?
We do not sell samples of the cleaner.
I want to re order Super Sealer 25 Matte but can’t find it anymore. Did you rename it?
https://www.opwdecks.com/matte-gloss.htm
Which product should I use to seal aggregate cement patio and walkways
Super Seal 30 in either Clear or Brown Tinted: https://www.opwdecks.com/30-higher-gloss.htm
We have an 1000 sq ft addition to our home, we colored the concrete when it was poured. It has a smooth troweled finish and would like to have a semi-gloss look. Do we need to etch on can we just apply product. Help
No need to etch.
What product would you suggest we use. It is indoors but we can open windows and doors for ventilation ?
Our products are all exterior. You can use them indoors but you will have a strong odor for many days until it dissipates as the product is solvent-based. Is that okay?
Hello guys..is it ok to reseal my stamped concrete patio if I have white/grey spots? if so what brand do you recommend me for dry hot weather , I live in las Vegas? thanks
That looks like an old sealer that is having issues turning white. Sealing over it will not fix that and it will probably get worse. You should remove it first. https://www.opwdecks.com/paver-sealer-stripper.htm
I have a freshly poured concrete garage floor. What can i do to protect it from the elements.
Look at using this product: https://www.opwdecks.com/m-non-gloss.htm
Is there a sealer that can be used for Efflorescence on a garage cement block wall after cleaning it with an efflorescence remover? Thank you for your help!
Sealers cannot prevent efflorescence.
Thank you for the reply. Any suggestions on how to deal with it? Thanks again. Allan
What is the best sealer for a concrete sidewalk? It’s just a broom finish, not stained or anything. Was poured in June. Not interested in a glossy finish, would like to keep it pretty much the way it looks now. Thanks in advance!
Use this product: https://www.opwdecks.com/m-non-gloss.htm
Thank you!
I have a stamped concrete driveway of about 1500 Sq ft in Toronto. It was installed about 6 years ago and never been sealed after initial installation. At a few locations, it also has pitting (eroded concrete). It has become dull in look but overall in good shape. Which sealant is best to protect, enhance the colour and look vibrant? Please also advise if I can add supper grip to make it less slippery. Thanks.
Use this product: https://www.opwdecks.com/masonrysaver-sealer.htm
No need for a grip.
Thanks for the prompt response. I assume it requires two coats. Please confirm. Thanks.
I have a concrete exposed aggregate driveway, which was installed 6 to 8 years ago here in central Ohio. It has not been resealed since original installation. What is the best sealer for this project?
Super Seal VOC.
Do you have a product suitable for sealing brick steps and paths that also has a mildew & mold preventative included?
Do you have a product you recommend for sealing bluestone pavers? I prefer a natural or a wet look but no gloss. I am primarily interested in stain prevention, especially rust.
Try this product: https://www.opwdecks.com/all-purpose-duty.htm
We have a 55-60 year old home with Canyon stone face brick that has not had any sealer on it for at least 45 years, if ever. What product would you recommend to clean and seal it. Thank you
Picture please.
Looking for wet-look sealer that will provide shine/gloss for my light tan colored concrete pool deck. It has a broom finish. Previously used Super Diamond Clear. I didn’t think it lasted very long. Thx!
Look at the Super Seal 30: https://www.opwdecks.com/superseal30-gloss-5-gallon.htm
Thanks! I bought it from you. What roller nap do you recommend for broom finish?
1/2″ nap.
We have stamped concrete walkways and porches. Does it matter what kind of sealant was applied previously or can I just clean it and reapply one with the finish I want? We don’t know what the previous owner applied.
Has the previous coating discolored or turned white? Please post a picture of you can.
picture attached — there’s so much dirt on it, I can’t tell if it’s turned white!
It looks like it has turned white in some areas. This means it should be stripped off as adding a sealer on top will not fix the problem and could make it even worse:
https://www.opwdecks.com/concrete-sealer-stripper.htm
thank you — can you recommend a new sealant to apply after we strip the old one? Is there a waiting period between stripping the old and applying the new or is it best to apply new right away?
Try the Super Seal 25.
I am looking to seal the concrete around by salt-water based pool. I would like a wetlook semi-gloss product. What do you recommend
Hello, for this, use the Super Seal 25:
https://www.opwdecks.com/25-semi-gloss.htm
How strong does the pressure washer need to be to remove sealant normally?
A pressure washer alone will not remove concrete sealers. You will need a chemicals stripper or similar while pressure washing. What type of stripper to use depends on what type of sealer you are actually trying to strip.
Please recommend cleaner and sealer for waterproofing a concrete patio poured on corrugated steel pan. Prefer for the concrete to not have a glossy appearance after treatment. Can you also recommend a crack caulk that is compatible with the sealer? Should I caulk cracks before or after the sealer application?
Fred, use this to seal:
https://www.opwdecks.com/m-non-gloss.htm
This will clean:
https://www.opwdecks.com/cleaner-degreaser.htm
Not sure on the caulk as we do not sell them.
I just finished my fire place in a new construction. I am looking for something to seal the hearth stone. what product would be best to put a finish on it to seal it from stains and maybe darken the stone a bit because it was to be a taupe color and it looks white? also don’t need a large amount. Thanks.
I am sorry but our products are for exterior use.
[quote name=”Tres”][quote name=”TheSealerStore”]
You surface requires a wet look sealer with some gloss. A siloxane type sealer will not work to seal in colored stain.[/quote]
Can you elaborate on why a siloxane type sealer will not work to seal in colored stain? Is it because the colored stain has reacted with the free lime? Or is there some other reason?
thank you for your time,
Tres[/quote]
Siloxane sealers are fully penetrating that create an internal barrier. They will not protect a dye/stain that is on the surface, You need a filing coating for this.
[quote name=”TheSealerStore”]
You surface requires a wet look sealer with some gloss. A siloxane type sealer will not work to seal in colored stain.[/quote]
Can you elaborate on why a siloxane type sealer will not work to seal in colored stain? Is it because the colored stain has reacted with the free lime? Or is there some other reason?
thank you for your time,
Tres
[quote name=”Tres”]We recently had our driveway and walkway redone. The concrete is a little over 30 days old. It is stamped and spray on colored. It also had the fiber additive. I am interested in a Silane/Siloxane deep penetrating water repellent sealer and my wife is interested in the “wet look”. Is there a product that does both very well? If not, can you apply Silane/Siloxane product then apply the “wet look” product? What would be the downside (if any) for using both products?
thank you for your time.[/quote]
You surface requires a wet look sealer with some gloss. A siloxane type sealer will not work to seal in colored stain.
We recently had our driveway and walkway redone. The concrete is a little over 30 days old. It is stamped and spray on colored. It also had the fiber additive. I am interested in a Silane/Siloxane deep penetrating water repellent sealer and my wife is interested in the “wet look”. Is there a product that does both very well? If not, can you apply Silane/Siloxane product then apply the “wet look” product? What would be the downside (if any) for using both products?
thank you for your time.
[quote name=”Christine Molling”]Have a textured stamped “brick colored” concrete walkway and patio on the OR coast- lots of rain, rarely freezes, but a couple times year. Condition of concrete: sealant gone, a bit worn since put in 11 yrs. ago. Medium foot traffic. What do you suggest: Super Seal 25 or 30? The specs on both seem about the same, except 25 says Semi-gloss and 30 High gloss. Please advise. Thank you so much :-)[/quote]
Yes, either would work and the only difference is that the 30 is a little bit shinier than the 25
Have a textured stamped “brick colored” concrete walkway and patio on the OR coast- lots of rain, rarely freezes, but a couple times year. Condition of concrete: sealant gone, a bit worn since put in 11 yrs. ago. Medium foot traffic. What do you suggest: Super Seal 25 or 30? The specs on both seem about the same, except 25 says Semi-gloss and 30 High gloss. Please advise. Thank you so much 🙂
[quote name=”Jim Alt”]I just had about 1000sf of new aggregate concrete added to my existing aggregate driveway. It was poured yesterday and my contractor wanted to seal it with SuperSeal30 today. It is my understanding, though, the concrete should cure 14-28 days before sealing, so we will wait. He told me the SuperSeal 30 comes in different colors- he recommended a brown for covering old and new- but I don’t see any reference to color choices in the 5 gallon cans. Is there, and am I doing the right thing to wait 2-4 weeks to seal it? I live in hot, humid, central Virginia[/quote]
SuperSeal 30 is a cure and seal so it can be applied as soon as it is dry. We do not offer it in colors on our website.
I just had about 1000sf of new aggregate concrete added to my existing aggregate driveway. It was poured yesterday and my contractor wanted to seal it with SuperSeal30 today. It is my understanding, though, the concrete should cure 14-28 days before sealing, so we will wait. He told me the SuperSeal 30 comes in different colors- he recommended a brown for covering old and new- but I don’t see any reference to color choices in the 5 gallon cans. Is there, and am I doing the right thing to wait 2-4 weeks to seal it? I live in hot, humid, central Virginia
[quote name=”JamesAB”]Looking for the best paver sealer to use that Illinois allows. I’m looking for one that will give a “wet look “back to my 15 year old paver deck.
Thank you !![/quote]
Look at this product:
https://www.opwdecks.com/voc-compliant.htm
Looking for the best paver sealer to use that Illinois allows. I’m looking for one that will give a “wet look “back to my 15 year old paver deck.
Thank you !!
[quote name=”Kenny”]Restoring old red brick house in deep south, a lot of heat, sun and moisture…. would like a product that will protect and also have a wet look finish and of course last….Regards[/quote]
Hello,
Wet look sealers will not work on vertical brick. Dries blotchy. For sealing, you would want the Masonry Saver Vertical Brick Sealer:
https://www.opwdecks.com/masonry-saver-defy-brick-water-repellent-5-gallon.htm
Restoring old red brick house in deep south, a lot of heat, sun and moisture…. would like a product that will protect and also have a wet look finish and of course last….Regards